CONCRETE SUPERPLASTICIZERS | CONCRETE PLASTICIZERS

Product:
ALPHALITH® superplasticizer F FM is a highly effective, purely synthetic superplasticizer without side effects for high quality concrete.

Features:

• strong increase of workability and/or reduction of w/c-ratio
• good homogeneity even with ow amounts of fines in the mix

Field of Application:

• water unpermeable concrete
• exposed concrete
• concrete with high frost-thaw-resistance
• concrete with high resistance against chemical attack
• under water concrete
• lightweight concrete / Schwerbeton
• high early strength concrete for traffic surfaces and runways
• prestressed concrete

Product:
ALPHALITH® FT 30 (FM)Superpasticizer FT 30 FM is an effective superplasticizer for the economical production of high quality concrete in ready-mix and precast applications.

Features:

• stron increaseof workability and/or reduction of w/c-ratio
• gives homogenous concrete with good workabilityand high early strength development

Field of Application:

ALPHALITH® FT 30 (FM) for concretes with special properties:

• with high resistance against chemical attack
• with high frost-thwas-resistance
• water unpermeable concrete

Product:
ALPHALITH® superplasticizer FT 30 LV (FM)  is a highly concentrated, very effective superplasticizer with purely synthetic active ingredients for the economical production of high quality concrete and high performance concrete in the precast or ready-mix plant and on site.

Features:

• high plasticizing and watersaving properties
• water reduction of up to 35 per cent
• high early and final strength
• good homogeniety of the mix
• none additional air entrained
• slight retardation of set, no retardation of hardening

Field of Application:

Concretes with special properties, e.g.:

• water-unpermeable concrete,
• high resistance against chemical attack
• high frost-thaw-resistance
• underwater concrete

Product:
ALPHALITH® Hyperflow 1031 (FM) is a superplasticizer with a very strong plasticizing effect and a particularly short mixing time, combined with very high early strength and consistency retention even at higher temperatures.

Features:

• excellent plasticizing properties
• high increase of early strength

Field of Application:

ALPHALITH® Hyerpflow 1031 (FM) is used for the economical production of:

• exposed precast concrete with low or no compaction effort
• self-compacting concrete (SCC)
• early high-strength concretes in consistencies F1-F6
• early high-strength prestressed concrete
• concretes with very low w/c ratios and high workability consistency
• high-strength concrete (= C55/67)

Product:
ALPHALITH Hyperflow 2000® FM is a superplasticizer of the new generation of PCE polymers with a performance exceeding the well-known melamine- and naphtalene-based superplasticizers by far.

ALPHALITH Hyperflow 2000® FM renders possible the production of high-slump concretes with extremely low w/cratio or of concretes, which may be cast in place with a minimum or without any need for compaction (SCC).

Concretes produces by the use of ALPHALITH Hyperflow 2000® FM exhibit a very moderate slump loss and a good homogeniety and stability when designed and mixed properly.

Features:

• very strong increase of workability and/or reduction of w/c-ratio with low dosages required
• excellent flowability also with high powder contents and use of silicafume

Field of Application:

• self-Compacting Concrete (SCC)
• high-Strength Concrete (HSC)
• high-Slump Concrete with extremely low watercement-ratio
• concrete with very high early- and final strength
• production of precast elements with high-quality surface finish

Product:
ALPHALITH® Hyperflow 2015 TB is a superplasticizer with good slump retention and high robustness. ALPHALITH® Hyperflow 2015 TB allows the production of top-quality concrete with extended processing time.

Features:

• effective cement-dispersing action
• strong plasticizing effect
• good slump retention

Field of Application:

• universal PCE superplasticizer for concrete with long-lasting slump
• ready-mix concrete
• prefabricated parts

Product:
ALPHALITH® Hyperflow 2020 FM is a superplasticizer of the new generation of PCE polymers with a very strong plasticizing action, high early strength development and moderate slump-loss for precast and ready-mix applications.

Features:

• strong increase of workability and/or reduction of w/c-rato with low dosages required
• excellent flowability also with high powder contents and use of silicafume.

Field of Application:

• concrete with very high early- and final strength
• production of precast elements with highquality surface finish
• high-slump Concrete with very low watercement-ratio
• high-strength Concrete (HSC) 
• ready mix concrete

Product:
ALPHALITH® Hyperflow 2025 FM is a superplasticizer of the new generation of PCE polymers with a very strong plasticizing action, high early strength development and an extended slump retention for precast and ready-mix applications

Features:

• very strong increase of workability and/or reduction fo w/c-ratio
• fast plasticizing action for short mixing times
• good surface finish
• high early strength development

Fields of Application:

• high-Slump Concrete with low water-cementratio
• concrete with high early- and final strength
• self-Compacting Concrete (SCC)
• high-Strength Concrete (HSC)
• production of high-quality ready-mix and precast concrete

Product:
ALPHALITH® Hyperflow 2025 LS (FM) is a superplasticizer of the new generation of PCE polymers with a very strong plasticizing action along with high early strength development and an extended slump retention with approval for the drinking water sector.

Features:

• very strong increase of workability and/or reduction of w/c-ratio
• good slump etention
• high early strength devlopment

Field of Application:

• high early strength concrete in slump classes F1-F6
• high early strength prestressed concrete
• concrete with very low w/c values and high slump
• concrete with extended slump retention
• production of exposed concrete precast elements with low or no compression effort
• self-compacting concrete (SCC)
• high-strength concrete (≥ C55/67)
• prestressed concrete
• concrete for drinking water applications

Product:
ALPHALITH® Hyperflow 2030 (FM)  is a superplasticizer of the new generation of PCE polymers with a very strong plasticizing action, very high early strength development and moderate slump-loss for precast and ready-mix applications.

Features:

• very strong increase of workability and/or reduction of w/c ratio
• very strong plasticizing effect even with high amounts of fines
• high increase of early strength

Field of Application:

• concrete with very high early- and final strength
• production of precast elements with highquality surface finish
• high-Slump Concrete with very low watercement-ratio
• self-Compacting Concrete (SCC)
• high-Strength Concrete (HSC)

Product:
ALPHALITH® Hyperflow 2030 LS (FM) is a superplasticizer of the new generation of PCE polymers with a very strong plasticizing action, high early strength development and an extended slump retention for precast and ready-mix applications.

Features:

• very strong increase workability and/or reduction of w/c-ratio
• very strong plasticizing effect even with high amounts of fines
• high increase of early strength

Field of Application:

• concrete with very high early- and final strength
• production of precast elements with highquality surface finish
• high-Slump Concrete with very low watercement-ratio
• self-Compacting Concrete (SCC)
• high-Strength Concrete (HSC)

Product:
ALPHALITH® Hyperflow 2035 (FM) is a superplasticizer of the new generation of PCE polymers with a very strong plasticizing action, very high early strength development and moderate slump-loss for precast concrete applications.

Features:

• very strong increase of workability and/or reduction of w/c ratio
• high early-strength development

Field of Application:

• concrete with very high early- and final strength
• oroduction of precast elements with highquality surface finish
• high-Slump Concrete with very low watercement-ratio
• self-Compacting Concrete (SCC)
• high-Strength Concrete (HSC)

Application:
ALPHALITH® Hyperflow 2035 LS (FM) is a superplasticizer with quick very strong plasticizing action along with very high early strength development at the same time as well as long slump retention. ALPHALITH® Hyperflow 2035 LS enables the production of durable concrete with very low water-cement values in slump classes F1-F6 and SCC.

Concrete produced with alphalith Hyperflow 2035 LS exhibits good stability of the mix with proper composition, even in higher temperatures.

Features:

• very strong increase of workability and/or reduction of w/c-ratio
• high early-strength development
• good slump retention

Field of Application:

• High early strength concrete in slump classes F1-F6 and high early strength prestressed concrete
• Concrete with very low w/c values and high slump
•  Concrete with extended slump retention
• Production of exposed concrete precast elements with low or no compression effort
• Self-compacting concrete (SCC)
• High-strength concrete (C55/67)

Application:
ALPHALITH® Hyperflow 2060 (FM) is a superplasticizer of the new generation of PCE polymers with a very strong plasticizing action, high early strength development and an extended slump retention for readymix and precast-applications.

Features:

• very strong plasticizing effect
• very strong increase of workability

Field of Application:

ALPHALITH® Hyperflow 2060 (FM) is used for the economical production of:

• ready-mix concrete (F3-F6)
• precast concrete with extended workability
• high-slump concrete with low water-cementratio
• concrete with high early- and final strength

Product:
ALPHALITH® Hyperflow 3000 (FM) is a superplasticizer of the new generation of PCE polymers with a combination of high plasticizing effect, high-earlystrength development and high slump retention.

Features:

• very strong increase of workability and/or redution of w/c-ratio
• high early-strength development
• good slump retention

Field of Application:

• self-compacting concrete (SCC)
• high-workabilty concrete (F5/F6)
• high-strength concrete (HSC)
• high-slump concrete with very low watercement-ratio
• concrete with very high early- and final strength
• production of precast elements with highquality surface finish

Product:
ALPHALITH® Hyperflow 3035 (FM) is a superplasticizer of the new generation of PCE polymers with a combination of high plasticizing effect, high-earlystrength development and low stickiness of concrete.

Features:

• very strong increase of workability and/or reduction of w/c-ratio
• high early-strength development
• good slump retention
• easy to trowel-smooth concrete surface

Field of Application:

• High-Slump Concrete with very low watercement-ratio
• Self-Compacting Concrete (SCC)
• High-Workabilty Concrete (F5/F6)
• High-Strength Concrete (HSC)
  Concrete with very high early- and final strength
• Production of precast elements with highquality surface finish

Product:
ALPHALITH® Hyperflow 4020 (FM) is a superplasticizer specially developed for high exposed concrete quality with good initial plasticizing, consistency maintenance and improved early strengths. Exposed concrete EN 934-2, T. 3.1, 3.2.

Features:

• deaerating and liquefying effec
• improved exposed concrete qualit
• reduced efflorescenc
• increased resistance to damaging environmental influences
• reduced tendency to soiling

Field of Application:

• self-compacting concrete (SCC)
• concretes of consistency class F2-F6
• exposed precast concrete with low compaction requirements
• ready-mixed concrete and prestressed concrete
• concretes with very low w/c ratios and high slump consistency

Product:
ALPHALITH® Hyperflow 4035 (FM) is a superplasticizer of the new generation of PCE polymers with highest efficiency and highest early-strength development.

Features:

• very strong increase of workability and/or reduction of w/c ratio
• very high early-strength development
• moderate slump retention

Field of Application:

• high-slump concrete with very low watercement-ratio
• self-compacting concrete (SCC)
• high-Workabilty concrete (F5/F6)
• high-Strength concrete (HSC)
• concrete with very high early- and final strength
• production of precast elements with highquality surface finish
• pre-stressed concrete

Product:
ALPHALITH® Hyperflow 5030 (FM) a superplasticizer with quick strong plasticizing action and solid slump retention. ALPHALITH® Hyperflow 5030 enables the production of durable concrete with high early strength development in slump classes F1-F6 and SVB.

Features:

• good/simplified smoothing behavior
• reduced viscosity of the concrete
• reduced tendency for skinning
• stability even with fluctuating water dosing

Field of Application:

• production of precast components of any kind
• easy-to-process, less viscous concrete
• production of top-quality exposed concrete
• high early strength concrete in slump classes F1-F6 and high early strength prestressed concrete
• ready-mixed concrete
• self-compacting concrete (SCC)
• high-strength concrete (C55/67)

Product:
ALPHALITH Hyperflow 5135 (FM) is a superplasticizer for universal applications with very quick strong plasticizing action and solid slump retention. It enables the production of durable concrete with high early strength development in slump classes F1-F6 and SVB.

Features:

• good/simplified smoothing behavior
• reduced viscosity of the concrete
• reduced tendency for skinning
• stability even with fluctuating water dosing

Field of Application:

• production of precast components of any kind
• easy-to-process, less viscous concrete
• production of top-quality exposed concrete
• high early strength concrete in slump classes F1-F6 and high early strength prestressed concrete
• ready-mixed concrete
• self-compacting concrete (SCC)
• high-strength concrete (C55/67)

Product:
ALPHALITH® Hyperflow 6020 VE (FM) is a superplasticizer specially developed for high exposed concrete quality with good initial plasticizing action, slump retention and high early strength development at the same time.

Features:

• enhanced quality of exposed concrete
• increased resistance against damaging environmental influences
• reduced efflorescence tendency

Field of Application:

• self-compacting concrete (SCC)
• F2-F6 slump class concrete
• precast concrete
• ready-mixed concrete
• concrete with very low w/c values and high slump

Product:
ALPHALITH NeoFlow® CK-135 a superplasticizer with quick strong plasticizing action and solid slump retention. ALPHALITH® NeoFlow® CK-135 enables the production of durable concrete with high early strength development in slump classes F1-F6 and SVB.

Features:

• good/simplified smoothing behavior
• reduced viscosity of the concrete
• reduced tendency for skinning
• stability even with fluctuating water dosing

Field of Application:

• Production of precast components of any kind
• Easy-to-process, less viscous concrete
• Production of top-quality exposed concrete
• High early strength concrete in slump classes F1-F6 and high early strength prestressed concrete
• Ready-mixed concrete
• Self-compacting concrete (SVB/SCC)
• High-strength concrete (C55/67)

Product:
ALPHALITH® Concrete Plasticizer 3 BV is a highly effective, liquid concrete plasticizer and water-reducing agent, based on a high grade lignosulphonic acid derivative.

When alphalith Concrete Plasticizer 3 BV is added to the mix, it is adsorbed onto the cement particles and gives a powerful deflocculating action.

The cement hydration reaction proceeds more efficiently with less water, resulting in a significant increase in strength or the possibility to reduce cement content of concrete.

Features:

• high increase of consistency and/or w/c-reduction
• gives homogeneous concrete with good workability

Field of Application:

• quality concrete of all grades
• impermeable concrete
• concrete with large reinforcement
• blocks, slabs, curbstone, pipes etc.