Icon Kontakt Email

vasb@eurva-purzbgrpuavx.pbz

Icon Telefon

+49 2638 | 9317-0

ADMIXTURE DISPENSERS FOR LIQUID CONCRETE ADMIXTURES

DOSIMATIC | DOSITRONIC

WITH US YOU RECEIVE ALL SERVICES FROM ONE SOURCE

 

By using admixture dispensers for concrete admixtures, you can handle your raw materials safely and economically.

You can improve the properties of your fresh or hardened concrete with optimally dosed concrete admixtures. Our concrete admixture dosing systems help you get the most out of your product.

In addition to our products and service, we offer volumetric and gravimetric concrete admixture dosing systems, tailored specifically to our products. These systems are fully automatic, ensure safe and economical dosing of all liquid concrete admixtures and can be used for a wide variety of tasks.

The dosing systems manufactured in-house range from a simple version with volumetric fill level control to multi-component scales.

Rhein-Chemotechnik GmbH offers the right solution for your application. Put your trust in quality Made in Germany.

Logo Made in Germany

Your Inquiry

    Please prove you are human by selecting the Key.

    Admixture dispensers for concrete admixtures

    Dosieranlage technische Ansicht Aussenansicht mit Gehauese

    DOSITRONIC TYP EK 4-10 P

    The DOSITRONIC Type EK 4-10 P admixture scale works with a load cell in accordance with the strain gage principle. The weighing container is mounted on a tubular steel frame such that no significant lateral forces are introduced. 4 fill lines are guided from the top in the weighing container. Each fill line has a mechanical pressure relief valve. The net weight is 10 kg.

    A line with a spray nozzle for automatic water flushing additionally leads into the weighing chamber. The rinsing lines have a rinsing valve, as well as a pressure regulator with pressure gage installed upstream. Each weighing container has a level switch with reed contact as overfill protection, which closes when overfilled.

    The weighing containers are discharged through a pneumatically actuated ball valve, single acting, spring actuated, with end position feedback, in free fall directly into the mixer(s). The pneumatically actuated ball valves for discharging the weighing container are normally closed.

    The liquids scale should be installed above the mixer level. A compressed air maintenance unit is used to clean, adjust and monitor the compressed air. As an option, an additional discharge pump can be provided per chamber for faster discharge of the scale.

    Cable terminal boxes are mounted for easy connection of the scale to the control technology and electronic diagnostic system. The DOSITRONIC Type EK 4-10 P is mounted in a sheet steel housing and is thus protected against dust and moisture.

    Dosieranlage technische Ansicht Aussenansicht mit Gehauese

    Also available as DOSITRONIC TYP DK 4-30 P.

    DOSITRONIC TYP DK 4-20 P

    DOSITRONIC

    TYP DK 4-20 P

    The DOSITRONIC Type DK 4-20 P admixture scale works with a load cell in accordance with the strain gage principle. 4 fill lines are guided from the top in the double-chamber weighing container, 2 fill lines each per weighing chamber. The net weight is 2 x10 kg. Each fill line has a mechanical pressure relief valve.

    A line with a spray nozzle for automatic water rinsing additionally leads into the weighing chamber. The rinsing lines have a rinsing valve per weighing chamber, as well as a pressure regulator with pressure gage installed upstream.
    Each weighing chamber has a level switch with reed contact as overfill protection, which closes when overfilled.

    The weighing chambers are discharged through a pneumatically actuated ball valve, single acting, spring actuated, with end position feedback, in free fall directly into the mixer(s). The pneumatically actuated ball valves for discharging the weighing chamber are normally closed.
    The liquids scale should be installed above the mixer level. A compressed air maintenance unit is used to clean, adjust and monitor the compressed air. As an option, an additional discharge pump can be provided per chamber for faster discharge of the scale.

    Cable terminal boxes are mounted for easy connection of the scale to the control technology and electronic diagnostic system.

    The DOSIMATIC DK 4-20 P is mounted in a sheet steel housing and is thus protected against dust and moisture.

    Also available as DOSITRONIC TYP DK 4-30 P.

    Dosieranlage technische Ansicht Aussenansicht mit Gehauese

    DOSIMATIC EK 2-5 P

    DOSIMATIC

    TYP EK 2-5 P

    The volumetric admixture dosing system DOSIMATIC EK 2-5 P is based on the principle of level measurement. The dosing tank contains 4 adjustable level probes that are adjustable in terms of their sensitivity. This means that you automatically control up to 4 different dosing quantities. In addition, you can set any number of dosing quantities by adjusting the level probes.

    The acrylic glass dosing cylinder provides easy visual control of the dosed quantity. A line with a spray nozzle for automatic water flushing additionally leads into the dosing cylinder. The rinsing line has a pneumatic rinsing valve, as well as a pressure regulator with pressure gage installed upstream. A compressed air maintenance unit is used to clean, adjust and monitor the compressed air. The DOSIMATIC EK 2-5 P is mounted in a sheet steel housing and is thus protected against dust and moisture.

    The dosing cylinder is filled using feed pumps. These are mounted above the corresponding storage tank. The dosing unit should be installed above the mixer level. Complete discharge takes place in free fall directly into the mixer.

     

    We are happy to advise you

    We will be happy to advise you on the selection of the appropriate admixture dispenser We analyze your precise requirement profile together with you. Our own quality management system guarantees consistent quality. All products and services of Rhein-Chemotechnik GmbH are measured and evaluated in accordance with the specifications of a DIN EN ISO 9001 certified quality management system.

    We are happy to advice you

    We are happy to advise you

    Your Inquiry

      Please prove you are human by selecting the Plane.

      Concrete admixtures for a wide range of applications

      We stock concrete admixtures for the concrete block industry, the precast concrete industry, as well as for ready-mixed and construction site concrete.
      Please contact us. We will be happy to advise you.

      Surface Protection Products
      Impregnation | Sealing| Coating

      Surface protection products protect the stone, increase the colour brilliance and extend its product life. Surface protection products from Rhein-Chemotechnik GmbH are tested according to strict quality specifications in our own laboratory and by independent, external institutes.

      Release Agents

      Our release agents from the tectol series enable you to create attractive and smooth concrete surfaces. tectol includes release agents for various formwork materials such as wood, plastic or steel. We will be happy to advise you.

      Cleaning and Maintenance Products

      Cleaning and maintenance in concrete and precast plants increase safety, improve working conditions
      and extend the service life of the assets. We will be happy to advise you

      Admixture Dispensers

      You can improve the properties of your fresh or hardened concrete with optimally dosed concrete admixtures. Our concrete admixture dosing systems help you get the most out of your product. We will be happy to advise you.

      Biodegradable Granulate

      PAVELITH® InterLay - the new and environmentally friendly layer separation for concrete block products. We will be happy to advise you.

      Service | Consulting | Chemistry and Concrete Laboratory

      The quality of our products and services ist of utmost importance. All products and services of Rhein-Chemotechnik GmbH are measured and evaluated in accordance with the specifications of a DIN EN ISO 9001 cerified quality management system.

      Welcome to Rhein-Chemotechnik GmbH

      With our team of 40 employees, we develop and sell high-quality concrete admixtures and surface protection products. With fixed project partners, we accompany you from the first enquiry to the use of our products on your site.

      Contact

      Rhein-Chemotechnik GmbH
      Gewerbepark Siebenmorgen 8
      53547 Breitscheid

      Phone. +49 (0)2638 | 9317-0
      vasb@eurva-purzbgrpuavx.pbz

      Business hours
      Mon - Thu 08.00 a.m. - 17.00 p.m
      Fri 08.00 a.m. - 16.00 p.m.