THE PRODUCTS SHOWN HERE REPRESENT A CROSS SECTION OF OUR PRODUCT RANGE!
Are you looking for something in particular? For additional products, please contact us directly!
Release Agents
With increasing demands on the design and visual appeal of concrete surfaces, the choice of the most suitable release agent is becoming an increasingly important aspect. The right release agent is a decisive factor in the reliable production of visually appealing concrete structures.
Our Rhein-Chemotechnik release agents offer the right solution for various parting tasks
- in the production of precast concrete parts
- for building construction and civil engineering
- In-site concrete elements
- concrete products.
In addition, our tectol release agents based on renewable raw materials meet the need for the use of environmentally friendly products to a high degree.
Product:
tectol Formenöl RC 120
Application:
- proven, versatile relase agent
- for mould of wood, coated boards, steel and plastic
Characteristics:
- sticks excellent on moulds
- easy and clean mould release
- high-quality surface finish
tectol Trennmittelkonzentrat M
tectol Trennemulsion GF
- available as water-dilutable concentrate
- availabe as ready-to-use emulsion
- for wood shuttering and for wooden or plasctic boards in concrete products manufacturing
- very economic in use
- mineral oil-based
- easy and fast demoulding
- smooth and flawless surfaces
tectol Supercast ES 100
+++NEW+++
tectol Supercast ES 350
- proven special release agents
- for concrete products manufacturing
- by wet-cast process using either PE, PU or silicone moulds
- fast and easy release of conrete products from the mould
- result in clean, uniform and almost flawless surfaces
tectol Supercast 1020
- for instant demoulding of pipes, manholes etc.
- easy demoulding
- economical in use
- biodregadable
tectol Supercast 1030
- heavy-duty release agent
- for instant demoulding of pipe sockets and spigot ends, manholes etc.
- easy demoulding
- economical in use
- biodregadable
tectol Supercast 3000
- heavy-duty release agent
- excellent adhesion on vertical moulds
- e.g. for precast garages
- very good adhesion on vertical moulds
- excellent demoulding
- results in clean, uniform and almost flawless fair-faced concrete
- economical in use
tectol Supercast 3100
- heavy-duty release agent
- for high-grade fair-faced concrete
- excellent demoulding
- results in clean and uniform surface
- prevents pore formation to a large extent
- high-grade rust prevention
- economical in use
tectol EcoCast 4000
- relase agent based on renewable raw materials
- free from mineral oil and solvents
- biodregadable
- easy demoulding
- economical in use
- biodegradable
- for fair-faced concrete
tectol Bioemulsion
- release emulsion for wood shuttering
- production boards in concrete paving and stone production
- fast and easly demoulding
- economic in use
- biodegradable
tectol BioCast Konzentrat
tectol BioCast Emulsion
- available as water-dilutable concentrate
- available as readey-to-use emulsion
- based on renewable raw materials
- for wood shuttering
- for wooden or plastic boards in concrete products manufacturing
- economic in use
- easy and fast demoulding
- uniform and smooth sufaces
- biodregadable
- based on renewable raw-materials
tectol BioBrettöl
- release agent and maintenance oil
- based on renewable raw materials
- for wood shuttering
- for wooden, plastic or steel boards in concrete products manufacturing
- economic in use
- prevents concrete residues on the boards
- extended working life of boards with regular use of the product
tectol CoatRelease
- special release agent
- for wooden, plastic or steel boards in concrte products manufacturing
- with subsequent application of polymer sealers or coatings
- significantly reduces sticking of sealers or coatings on the boards
- easier cleaning of the boards from polymer residues
+++NEW+++
tectol CoatRelease 2
- special release agent for production board
- during concrete block finishing
- significant reduction of adhesion of coating materials
- protects the production board
- softens excess coating residues
- making clean-up easier
- environmentally friendly
- biodegradable
Product:
tectol Release Agent RC 120
Application:
- proven, versatile Relase Agent
- for mould of wood, coated boards, steel and plastic
Characteristics:
- sticks excellent on moulds
- easy and clean mould release
- high-quality surface finish
Product:
tectol Trennmittelkonzentrat M
tectol Trennemulsion GF
Application:
- available as water-dilutable concentrate
- availabe as ready-to-use emulsion
- for wood shuttering and for wooden or plasctic boards in concrete products manufacturing
Characteristics:
- very economic in use
- mineral oil-based
- easy and fast demoulding
- smooth and flawless surfaces
Product:
tectol Supercast ES 100
+++NEW+++
tectol Supercast ES 350
Application:
- proven special release agents
- for concrete products manufacturing
- by wet-cast process using either PE, PU or silicone moulds
Characteristics:
- fast and easy release of conrete products from the mould
- result in clean, uniform and almost flawless surfaces
Product:
tectol Supercast 1020
Application:
- for instant demoulding of pipes, manholes etc.
Characteristics:
- easy demoulding
- economical in use
- biodregadable
Product:
tectol Supercast 1030
Application:
- heavy-duty release agent
- for instant demoulding of pipe sockets and spigot ends, manholes etc.
Characteristics:
- easy demoulding
- economical in use
- biodregadable
Product:
tectol Supercast 3000
Application:
- heavy-duty release agent
- excellent adhesion on vertical moulds
- e.g. for precast garages
Characteristics:
- very good adhesion on vertical moulds
- excellent demoulding
- results in clean, uniform and almost flawless fair-faced concrete
- economical in use
Product:
tectol Supercast 3100
Application:
- heavy-duty release agent
- for high-grade fair-faced concrete
Characteristics:
- excellent demoulding
- results in clean and uniform surface
- prevents pore formation
- high-grade rust prevention
- economical in use
Product:
tectol EcoCast 4000
Application:
- relase agent based on renewable raw materials
- free from mineral oil and solvents
- biodregadable
Characteristics:
- easy demoulding
- economical in use
- biodegradable
- for fair-faced concrete
Product:
tectol Bioemulsion
Application:
- release emulsion for wood shuttering
- production boards in concrete paving and stone production
Characteristics:
- fast and easly demoulding
- economic in use
- biodegradable
Product:
tectol BioCast Konzentrat
tectol BioCast Emulsion
Application:
- available as water-dilutable concentrate
- available as readey-to-use emulsion
- based on renewable raw materials
- for wood shuttering
- for wooden or plastic boards in concrete products manufacturing
Characteristics:
- economic in use
- easy and fast demoulding
- uniform and smooth sufaces
- biodregadable
- based on renewable raw-materials
Product:
tectol BioBrettöl
Application:
- release agent and maintenance oil
- based on renewable raw materials
- for wood shuttering
- for wooden, plastic or steel boards in concrete products manufacturing
Characteristics:
- economic in use
- prevents concrete residues on the boards
- extended working life of boards with regular use of the product
Product:
tectol CoatRelease
Application:
- special release agent
- for wooden, plastic or steel boards in concrte products manufacturing
Characteristics:
- significantly reduces sticking of sealers or coatings on the boards
- easier cleaning of the boards from polymer residues
Product:
+++NEW+++
tectol CoatRelease 2
Application:
- special release agent for production board
- during concrete block finishing
Characteristics:
- significant reduction of adhesion of coating materials
- protects the production board
- softens excess coating residues
- making clean-up easier
- environmentally friendly
- biodegradable
Rhein-Chemotechnik GmbH
Gewerbepark Siebenmorgen 8 • 53547 Breitscheid (GERMANY)
Tel.: +49 (0)2638 9317-0 • Fax: +49 (0)2638 9317-13 • E-Mail: info@rhein-chemotechnik.com