Concrete superplasticizers
Alphalith FTB (FM)
Use:
Superplasticizer for precast and ready-mix concrete, for quality concrete in consistency range F3-F6, concrete with special properties (e.g. water-impermeable concrete), pumped concrete, material cost optimization for the production of economical quality concrete.
Charcteristic:
Strong increase of workability or reduction of w/c-ratio, homogeneous concrete, high early strength increase.
Type:
Concrete Superplasticizer acc. to EN 934-2, T.3.1,32
Alphalith F (FM)
Use:
Superplasticizer for concrete with improved surface finished and high early strength, preferably in the precast plant, e.g. facade elements, constructional elements, retaining wall elements, steps etc.
Charcteristic:
Strong increase of workability and/or reduction of w/c-ratio, good homogeneity even with low amounts of fines in the mix.
Type:
Concrete Superplasticizer acc. to EN 934-2, T.3.1,32
Alphalith FT 30 (FM)
Use:
Concentrated superplasticizer for high-quality precast and ready-mix concrete with good surface finish. Concrete with special properties. Concrete for roads and bridges.
Charcteristic:
Strong increase of workability and/or reduction of w/c-ratio, gives homogenous concrete with good workability and high early strength development.
Type:
Concrete Superplasticizer acc. to EN 934-2, T.3.1,32
Alphalith FT 30 LV (FM)
Use:
Highly concentrated superplasticizer for high-quality precast- and ready-mix concrete, prestressed concrete, high-strength concrete, self compacting concrete (SCC), flowing concrete with very low w/c-ratio.
Charcteristic:
Very strong increase of workability and/or reduction of w/c-ratio, very high early - and final strength, excellent flowability also with high powder contents and use of silicafume.
Type:
Concrete Superplasticizer acc. to EN 934-2, T.3.1,32
Alphalith Hyperflow 2000 (FM)
Use:
High performance superplasticizer of the new generation for high-quality concrete with optimum surface finish at minimum compaction (F6) or as self compacting concrete (SCC), high-strength concrete.
Charcteristic:
Very strong increase of workability and/or reduction of w/c-ratio with low dosages required, excellent flowability also with high powder contents and use of silicafume.
Type:
Concrete Superplasticizer acc. to EN 934-2, T.3.1,32
Alphalith Hyperflow 2020 (FM)
Use:
High performance superplasticizer of the new generation for high-quality concrete with optimum surface finish at minimum compaction (F6) or as self compacting concrete (SCC), high-strength concrete.
Charcteristic:
Very strong increase of workability and/or reduction of w/c-ratio with low dosages required, excellent flowability also with high powder contents and use of silicafume.
Type:
Concrete Superplasticizer acc. to EN 934-2, T.3.1,32
Alphalith Hyperflow 2025 (FM)
Use:
High-performance superplasticizer for medium slump and high slump concrete for precast applications.
Characteristic:
Very strong increase of workability and/or reduction of w/c-ratio; fast plasticizing action for short mixing times; good su8rface finish, high early strength development.
Type:
Concrete Superplasticizer acc. to EN 934-2, T. 3.1,3.2
Alphalith Hyperflow 2025 LS (FM)
Use:
High-performance superplasticizer for medium slump and high slump concrete with good slump retention for precast and ready-mix concret.
Characteristic:
Very strong increase of workability and/or reduction of w/c-ratio; good slump retention; high early strength development.
Type:
Concrete Superplasticizer acc. to EN 934-2, T. 3.1,3.2
Alphalith Hyperflow 2030 (FM)
Use:
High-performance superplasticizer for medium slump and high slump concrete with very high early strength for precast applications.
Characteristic:
Very strong increase of workability and/or reduction of w/c-ratio; very strong plastizing effect even with high amounts of fines; high increase of early strength.
Type:
Concrete Superplasticizer acc. to EN 934-2, T. 3.1,3.2
Alphalith Hyperflow 2030 LS (FM)
Use:
High-performance superplasticizer for medium slump and high slump concrete with very high early strength for precast application.
Characteristic:
Very strong increase of workability and/or reduction of w/c-ratio; very strong plastizing effect even with high amounts of fines; high increase of early strength.
Type:
Concrete Superplasticizer acc. to EN 934-2, T. 3.1,3.2
Ask our engineers and technical consultants as well as our labs for achieving optimal results in the usage of products by Rhein-Chemotechnik.
